LetterAgent
Mail physical letters by just asking your AI assistant.
Home > Guides > Ship a blender
Take the blender apart, wrap the blade assembly on its own, pack the jar separately from the base, and bag the lid and small parts together. A blender breaks in transit when the heavy base shifts, the blades cut through packing, or the jar knocks against the base. Separate every hard part with padding, and weigh the packed box before labelling.
The blade assembly is the most dangerous part of a blender to pack badly, because sharp blades cut through bubble wrap and thin cardboard if they shift. Wrap the blade assembly in several layers of bubble wrap, then wrap that bundle in a layer of cardboard or thick paper, so the blades cannot reach the box wall or another part. Tape the bundle closed, and place it where it cannot slide: wedged in padding, not loose on top of the jar.
Never ship blades loose in a bag with the cord or the lid. A loose blade in a bag will cut the bag, then cut whatever it lands on, and it can cut the person who opens the box. If the blade assembly unscrews from the jar, separate them before packing. If it is fixed to the jar, wrap the whole jar with extra layers around the blade end, and mark the inner wrap so the recipient knows where the sharp end is when unpacking.
Glass jars get the full fragile treatment: wrap in bubble wrap, place upright in the box, and pad on all sides so the jar never touches the base or the box wall. Plastic jars are tougher, but they still crack at the base and the handle if they take a hard knock, so wrap them too. Pack the jar and the base in separate compartments of the box, divided by a cardboard divider or a thick layer of padding, because the base is the heaviest part and will damage the jar if it shifts onto it.
Remove the lid, the measuring cap, and any tamper or pusher, wash and dry them, and bag them together. A tamper left loose in the box becomes a baton that dents the jar and the base. Coil the cord loosely and secure it with a twist tie, keeping it away from the blade bundle. Set the base upright, pad around it, and fill the top of the box so nothing can bounce when the box is set down.
| Part | How to pack it | Why it matters |
|---|---|---|
| Blade assembly | Bubble wrap plus cardboard wrap, taped | Blades cut packing and other parts |
| Glass jar | Wrapped, upright, padded all sides | Cracks at base and handle |
| Plastic jar | Wrapped, separated from base | Still cracks under a hard knock |
| Base and motor | Upright, padded, heaviest at bottom | Heavy base damages the jar if it shifts |
| Lid, cap, tamper | Washed, dried, bagged together | Loose parts dent the jar and base |
Use the original box with its inserts if you have it. Otherwise, pick a box a few inches larger than the base on every side, and line the bottom with crumpled paper. Place the base first, add a divider, then the jar, then the blade bundle and the bag of small parts on top, each in its own padding. Do the shake test before sealing: tilt the box and listen. Any movement means a part can build up force before it hits something, so add padding until the box is silent.
Weigh the finished box before asking for a label. A blender base plus a glass jar is heavier than most kitchen items, and a packed blender can approach the 5 kg limit of a LetterAgent Xpresspost label. If the scale says you are over, remove nothing protective to save weight: use a service rated for heavier parcels instead.
Ask your AI assistant for a Canada Post Xpresspost shipping label through LetterAgent, approve the exact quoted price, and print the label PDF. LetterAgent labels are Canada-only, flat-rate Xpresspost, and cover parcels up to 5 kg. If the parcel is headed outside Canada, LetterAgent cannot provide the label, so use a carrier that serves that destination directly. Put the label flat on the largest side of the box, clear of seams, and photograph the sealed parcel before drop-off. Check the weight first, since a large blender with a glass jar can run close to that limit.
Ready to ship it? Get a shipping label with LetterAgent: describe it to your AI assistant, approve the exact quoted price, and get your label.
LetterAgent is a working name. Prices include print, postage, and our service fee. US prices in USD, Canadian prices in CAD (Canadian prices exclude applicable sales tax, added at checkout). Currently in private testing.
Need help? Ask your assistant: it can check a job's status any time. If it ever can't handle something: hello@getletteragent.com